Marvell Series  

Data Center Switch 32 x 400G QSFP56-DD, 2 x 10G SFP+

LA-SWM3-DC400G32X10G02M

LA-SWM3-DC400G32X10G02M is a high port density switch with 32 x QSFP56-DD ports in a single 1RU and single packet forwarding engine, suitable for Data centers that need unprecedented speed.

Data Center Switch 32 x 400G QSFP56-DD, 2 x 10G SFP+

LA-SWM3-DC400G32X10G02M

LA-SWM3-DC400G32X10G02M is a high port density switch with 32 x QSFP56-DD ports in a single 1RU and single packet forwarding engine, suitable for Data centers that need unprecedented speed.

LA-SWM3-DC400G32X10G02M is a high port density switch with 32 x QSFP56-DD ports in a single 1RU and single packet forwarding engine, suitable for Data centers that need unprecedented speed. With 32 QSFP56-DD 400Gpbs ports it is ideally suited for deployment at leaf/spine in data centers, where high performance is the most important, or, with 25.6Tbps  (12.8Tbpsx2) total performance - as ultra-powerful appliance.


Primarily packaged to meet the requirements of deployments that require smaller form factor and access to all network ports and management ports from the front side of the product. Be used to provide 32 x 400GbE + 2 x 10GbE ports solution. In the interest of achieving the smallest possible form factor, minimum cost and the lowest system power consumption. In order to be able to fit all access, uplink and data ports on the front side of a 1U system, all data plane connectivity to i t is provided through QSFP56-DD sockets. Each QSFP56-DD socket can operate as a single 400GbE port. Main Ethernet access ports are QSFP56-DD sockets which support 400GBASE-SR8, FR8, LR8, ER8 and DR4 physical layers. The total system contains a CPU subsystem with 16GB of DDR4 RAM and 64GB of M.2 SSD storage by the default setting. The CPU is connected to a set of central management pro- cessors that reside elsewhere in the system through an out of band control plane Ethernet connection.


Features 

● Compact 1RU standard, 19-inch rack mountable design

● Cut-through with ultra-low-latency

● 2 (1+1 redundant) Redundant Hot-swappable PSU

● 5 (4+1 redundant) Hot-swappable Fan

● 32x400Gbps QSFP56-DD in 1U form factor

● 256x56Gbps High Speed Serdes MAC in a single PFE Packet Forwarding Engine that support 1/10/25/56 port speed modes

● 2x10Gpbe SFP+ and 1xGbaseT RJ45 Management Plane Ports


Optional Software 
*License fee will be quoted separately according to different project management requirements.
*Optional features supported by Hardware but limited to Software roadmap.


Layer 2 Feature list
 802.1D Spanning Tree Protocol/802.1 w Rapid
 Spanning Tree / 802.1 s Multiple Spanning Tree / RPVST+
 VLAN’s with QinQ
 802.1Q VLAN’s / Trunking support
 Private VLAN’s
 802.1 AB Link Layer Discovery protocol
 802.3x Flow control
 802.1x Authentication*
 802.3ad Link aggregation group support
 Multi-chassis Link aggregation group support 
 CFM 802.1ag*
 Y.1731*
 VxLAN support with EVPN
 TRILL*
 QCN, ETS, PFC*


Layer 3 Feature list
 Static IPv4/Ipv6
 OSPFv2/v3, ISIS (v4/v6), MP-BGP, RIPv2
 Multi-path ECMP
 VRF Lite – IPv4
 BFD for IPv4, IPv6, Protocol support for OSPF, BGP 
 in Global and VRF space
 IGMP v2/v3
 IGMP Snooping, querier, proxy report suppression
 MLD
 MSDP
 PIM-SM, PIM-SSM, PIM-DM (IPv4/IPv6
 VRRP


MPLS/MPLS-TP Feature list*
 MPLS Architecture Support*
 LDP, RSVP support*
 RSVP Traffic Engineering support*
 RSVP FRR with 1:1 and 1:n support*
 Pseudowire setup and maintenance using LDP*
 Pseudowire setup and maintenance using BGP*
 EVPN support over VPLS*
 MPLS L3VPN for IPv4/IPv6*
 Differentiated Services over MPLS*
 BFD for Pseudowire VCCV*
 OAM for MPLs based transport networks, proactive connectivity check, RDI*
 MPLS TP, Transport Profile Support*
 MVPN Support*


Management, Security and Qos Features
 Access control list
 RADIUS & TACACS+ support
 Role based access control
 Modular QOS for Policing, Marking and Shaping
 Hierarchical QOS*
 Flexible flow classification and action rule-set
 NETCONF support*
 Ansible Integration*
 Sflow support
 DCHP Relay/Client
 Syslog
 SNMP Support
 Industry standard CLI



Provided Fix Ports

32 x 400G QSFP56-DD, 2 x 10G SFP+

Management Ports

1x RJ45 100/1000Base-T out-of-band

1x RJ45 Console, 1x USB Type A

Switching Capacity

25.6Tbit/s

Forwarding Rate

19Gpps

Switch ASIC

Marvell Falcon 98CX8580

CPU

Intel Broadwell-DE D1508

Flash

64GB(SSD)

RAM

16GB

FANs

5 (4+1 AFI/AFO in and out option

PSU

2 x 1600W hot swap AFI/AFO

VLAN

4K VLANs; 1:1 & 2:2 VLAN Mapping; QinQ, ive QinQ; MAC based VLAN; Protocols based VLAN

Guest VLAN; Voice VLAN

Port Trunk

LACP; 32 trunk groups at most, up to 8 ports in each group

MAC

128K MAC; Static MAC; Dynamic MAC;

IP Routing

Static routing; OSPF; ISIS; BGP, GRE

Multicast

IGMP snooping, IGMP filter, IGMP Proxy and IGMP fast leave;

Multicast replication between VLANs; PIM-SM; PIM-DM; Source Specific Multicast (SSM)

Reliability

STP, RSTP, MSTP; R-Link protection, VRRP, Trunk, Redundancy power

BPDU Guard, Loop protection, Root protection;

QoS/ACL

Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type and VLAN ID

Time range ACL

Rate limiting with granularity at 64Kbps

Port-based traffic policing and two-rate three-color CAR

8 queues on each port

Flexible scheduling algorithms, including SP/PQ, DRR, SP/PQ+DRR

Re-marking of the 802.1p priority and DSCP priority

Security

User privilege management and password protection

DoS attack defense, ARP attack defense, IP source guard

Binding of the IP address, MAC address, interface

Port isolation, Port security

Black hole MAC address entries

Limit on number of learned MAC addresses

802.1x authentication, RADIUS authentication

SSH v2.0

CPU protection

Data Center Feature

EVPN,VXLAN,M-Lag

Energy Saving

Dynamic fan speed adjusting

Management

& Maintenance

Port mirroring and Flow-based mirroring

Configuration via CLI, Telnet, Console port

SNMP v1/v2/v3, RMON, LLDP, Cluster network, Syslog, Traplog

Third-Party GUI management platform based on SNMP

Loading and upgrade via FTP/TFTP

Port loopback detection

Operating Environment

Operation temperature: 0℃ to 40℃

Relative humidity: 10%-90% (non-condensing)

Input Voltage

AC: Rated voltage range: 100V to 240V AC, 50/60Hz

Maximum voltage range: 90V to 264V AC, 50/60Hz

Dimensions

445×540×44mm (WxDxH)

Power Consumption

≤1200w

N.W.

11KG

Ordering Information
LA-SWM3-DC400G32X10G02M Data Center Managed Switch 32 x 400G QSFP56-DD, 2 x 10G SFP+
Date Version Description Download
2024-04-26 V3.0 Datasheet_Data Center Managed Switch_LA-SWM3-DC400G32X10G02M_V3.0 KZ.pdf
Photo Model Description
Get Details by Web Inquiry