As we know, both Cisco and HP SFP module’s built-in block code that limits to user only can install the Cisco and HP SFP Mini-GBIC module into Cisco and HP switch. It is recommended to an SFP module without block code, such as Lanbras or third-party SFP module.
STP (Spanning Tree Protocol) and RSTP (Rapid Spanning Tree Protocol) are often applied in mesh network structure for commercial environment. Lanbras’ Redundant Ring adopts ring technology, which has fast responding time to bring you the best system recovery performance.
Lanbras Managed Industrial Switch is implemented with "Rest" button. To reset the IP address to the default IP Address "192.168.0.100" or rest the password to default value. Press the hardware reset button at the bottom panel about 10 seconds. After the device is rebooted, you can login the management WEB interface within the same subnet of 192.168.0.xx.
Before accessing WEB, please clear IE browser cache and cookies. Otherwise it may cause the page to display abnormally.
PoE (power Over Ethernet) Means supply data for end device (For example, IP Telephone、Wireless AP、Network camera, etc), meanwhile it can supply power for this devices, it do not need change any Ethernet Cat.5 wiring infrastructure.
POE switch each port output watts 15.4W or 30W and meet IEEE 802.3af/802.at standard that through cable supply power method is standard PoE supply device, avoid extra power cable. Meet IEEE802.3at Poe switch, each port output can reach 30W, acceptable device can receive watts 25.4W. Generally speaking, POE switch is supply power and data through cable, its not only have the function can supply data transmission same with normal switch, meanwhile, it have the function that can supply power for end device.
a. Restore the factory settings via the management software BlueEyes_II.
b. Use DIP switch to make device restore factory settings according to hardware user manual.
c. The initial user name and password are "admin" for layer 2 switch, serial server and Modbus gateway.
a. Check the power adapter voltage is suitable according to the back sticker of product.
b. Check the ‘+’ and ‘-’ according to mark of product.
Microsoft Windows 2000, Window XP, Windows 2003, Windows Server 2008, Windows 7, Window 8, Windows 10 and other mainstream 32bit &64bit operating system.